Dismantling the door: what you should know?January 26, 2018
When a major overhaul or other construction work in the house is made, the dismantling of the doors is not uncommon. However, as a rule, the doors are dismantled for several reasons. This is when they are replaced or when new interior doors are installed.
Whatever it was, but this process requires a special approach. After all, if there is no need to use the old doors in the future, then you can perform one way to dismantle them, and with the safety of the doors, you will need to apply a completely different way.
When carrying out the dismantling of the doors, when there is no need to use them in the future, you can not worry about such details and their safety, as the door frame, cashiers, etc. In this case, the main task is to quickly release the doorway in order to install new doors.
To implement this process, you need a nail puller, a piece of timber and a hammer.With the help of the nail puller, it is necessary to remove the door leaf from the hinges. For this, a nail puller is installed between the floor covering and the door leaf below. In order not to damage the flooring, a small wooden bar is used, on which the nail puller is installed with its shaped part.
After the door leaf is successfully removed from the hinges, you can proceed to disassemble the cashing. The platbands from the doorframe, if ordinary nails were used to fix them, can also be pushed and dismounted with the help of a nail puller. If the platbands were screwed with wood screws, then it is necessary to use a screwdriver or a simple figure screwdriver to unscrew the screws.
Next, you need to remove the fasteners with the help of which the door frame is fixed in the opening. If the door frame is held on one mounting foam, then this task is much simpler, since it will be enough just to make cuts in the foam with a long knife and then release the door leaf from it.
The second method of dismantlinginterior doorsprovides for their secondary use, so it is necessary to act as carefully and harmoniously as possible. First, the main thing is not to damage the trim and the door leaf with the box.
To remove the trim, you should use not a nail puller, but a chisel and pliers. To do this, the chisel is wound up under the caster, after which with a little effort it is necessary to try to pick a nail and pull it out with the help of pliers, grabbing the cap.