How to clean the washing machine with citric acid: disadvantages and advantages of the method + instructions

Today it is difficult to imagine a family that does not have a washing machine. She has long ceased to be a luxury item, and in families where there are small children, this helper is simply not enough. Do you agree? But, like any household appliances, the washing machine can break.

The most common cause of damage is scaling on its details. It can reduce consumer characteristics and even disable your assistant.

To prevent problems, it does not hurt to know how to clean the washing machine with citric acid (LC). This method is absolutely safe for equipment, but only if certain rules are followed.

In this material you will find expert advice that will help to clean the washing machine from scale, without resorting to the services of specialists.We will talk about how often you need to carry out preventive cleaning with citric acid. In addition, the article contains videos that demonstrate the process of caring for appliances.

Scale and chemistry to remove it

The basis of scale in household washing machines (SM) are insoluble magnesium and calcium carbonates.(CACO3 and MgCO3), settling on the details. They determine the level of water hardness, and their concentration affects not only the formation of scale, but also the chemical effectiveness of the detergent.

In accessible places, salt deposits can be mechanically torn off, but it is quite problematic to reach scale on the heating heating element.

Therefore, a chemical method using citric acid is used to remove it in hard-to-reach places. It dissolvesCacO3andMgCO3, and does not corrode metal surfaces.

Benefits of Using Citric Acid Cleansing
Citric acid is an affordable, always commercially available product that effectively dissolves resistant mineral deposits.

The chemical reaction is:


Calcium citrate is formed during the reaction in the SM.(Ca3(FROM6H5O7)2)which dissolves well in water and is removed with it when draining. It is safe for humans and even comes in tablets to replenish the reserve of calcium in the body.

Theoretically, 125 grams of citric acid would be required to clean a washing machine from 100 grams of scale. This chemical fact must be remembered when evaluating the effectiveness of the cleaning.

Citric acid formula
The purity of citric acid is only important in cooking, for descaling the main thing is the low cost and the correctly calculated amount.

Causes and effects of scaling

The scaling formed in the washer is a fait accompli that requires a response. But we can not ignore the reasons for its occurrence, which can repeat the process of salt deposition on the details.

Mode of intensive long washing
Frequent washing at a temperature of 95 ° C reduces the service life of the washing machine. A mode of 30-40 ° C in combination with a good powder is also able to remove all the dirt from things

The formation of scale contribute to:

  1. Carbonates dissolved in water, cations of calcium, magnesium.
  2. High temperature wash (over 60 ° C).
  3. The use of phosphate-free powders.

The effect of high temperatures is that with strong heating, vapor bubbles begin to form on the metal surface of the heating element — the result of local boiling of water.

At the micro level, this leads to its separation into a pure fraction.H2O, passing into the surrounding liquid, and insoluble carbonates deposited on the metal. The higher the temperature of the wash, the more it undertakes to scale in one cycle.

Besfosfatnyh powders favorably affect the ecosystems of reservoirs, which are drained sewage, but people they bring some problems.

Phosphates reduce the overall hardness of water and inhibit the formation of insoluble carbonates, so they are used in special means for the internal cleaning of washing machines.

Blown Heater Washing Machine
Try to try the temperature of the glass door SM in washing mode, as its coldness indicates the breakdown of the heater

The absence of phosphates in the detergent powders leads to an acceleration of salt sedimentation on the SM parts and the following consequences:

  1. Overheating of the heating element due to poor heat transfer to the surrounding water through the scale.
  2. A layer of salts isolates metal and rubber parts from the air, which contributes to the retention of moisture, rusting and reduced strength.

In general, there is little good from scale, so you should remove it with citric acid or another effective remedy.About the features of this method should know the maximum information.

Sediment on the washing machine drum
Mineral sediment on the pulley, crosspiece, bearing and other nearby moving and in contact with each other parts increases the load on the engine, as a result, contributes to accelerated wear

Pros and cons of cleaning with citric acid

The properties of citric acid are due to its chemical structure. This substance was not specifically invented for cleaning washing machines, so its effect on machinery parts has both positive and negative sides.

The positive side of the method

Without cleaning scale in the SM, you can expect, at a minimum, a TENa burnout. Therefore, to pull the cleaning procedure is not worth it. The method of removing deposits should allow every person without experience to carry out the procedure.

Large package of citric acid
When deciding to regularly clean CM with citric acid, you can immediately buy a large amount of it. So it will be cheaper and less troublesome

The use of citric acid to eliminate accumulated insoluble salts meets this requirement due to several advantages:

  1. Availability and low cost. You can buy citric acid in the right quantity at any store forseveral dozen rubles.
  2. Simplicity. Even an unprepared person can carry out the cleaning procedure.
  3. Efficiency. 100 g of citric acid dissolve up to 80 g of scale.
  4. Security. Both citric acid and calcium citrate formed after dissolving scale are harmless to health.

These positive sides of LC make it the drug of choice in the fight against scale. It makes no sense to buy expensive special equipment for cleaning CM, if they provide the same effect.

Advantages of citric acid
Citric acid is used both in the care of internal and external parts of the washer. The advantage of the traditional product is that with the use of lemon, it is possible to effectively clean the surfaces inaccessible to the user.

Confirmation of removal efficiency of citric acid was demonstrated in the video:

Negative effect of citric acid

There are legends about the negative effect of citric acid on the internal parts when cleaning the washing machine. There are numerous arguments against this method, but few provide evidence.

Theoretical claims of people to clean CM with citric acid are:

  1. The formation of salts that remain in the washing machine and can clog drain.
  2. Acid corrodes metal components of PETN.
  3. Rubber seals soften and may crack.
  4. After cleaning things have a peculiar smell.

To remove scale in the SM used 1% citric acid solution.

For comparison, a 10% solution of aggressive hydrochloric acid is used to clean water boilers from deposits. And even multiple processing with such a powerful tool does not affect the operation of the equipment. And rubber is generally resistant to the short-term effects of weak acids.

The problem will arise if the crystals or citric acid solution remain in the pocket of the rubber cuff sealing the door. In other cases, the negative effect of citric acid on the insides of a washing machine is a myth.

Holes in the cuff of citric acid
Holes in the cuff of citric acid do not occur immediately, but only after multiple sessions of descaling without observing elementary rules

Salts formed during the cleaning of scale together with the remnants of LC are completely removed by the following two or three rinses, leaving no smell or residue.

Are all the cons of citric acid contrived? No, scaling has another flaw, but it is common to all cleaning products.

Insoluble salts can accumulate in places of water leakage, temporarily tightening the hole and removing the problem. After cleaning the washing machine, a leak may appear again.

The described problem is not initiated by citric acid or other means, but the possibility of its occurrence should be remembered.

Consequences of using LC for cleaning CM are presented in the video:

The process of cleaning the washing machine

Citric acid cleans not only the internal parts of the CM, but also the box for falling asleep powder, the door and its rubber gasket.

For this you will need:

  • 100 g of citric acid;
  • water-absorbing rag.

The following step by step instructions for cleaning the washing machine with citric acid is guaranteed to help get rid of internal salt deposits, without harming the details of technology.

The principle of cleaning cars with lemon
Simplified principle of cleaning the inside of the washer with citric acid is to conduct a normal washing session with the loading of a folk remedy in a ditch for washing compositions or in a drum

Step # 1: preparation for cleaning

You should first check the drum again and remove things from it, if any. Then measure 100 grams of citric acid for a washing machine with a load of 6 kg.

If the technique involves a different maximum amount of laundry, then the amount of reagent should be adjusted in the appropriate direction.

It is possible to use a lemon in 2 types:

  • crystalline;
  • diluted in water.

Dissolved acid is preferred because crystals are guaranteed to never get stuck. 100 grams of lemon leaves are diluted in half a liter of warm water. LK in the dissolved form is not suitable for cleaning washing machines, which in the beginning of work pump out the remaining water under the drum.

Step # 2: Loading the acid and turning on the washing machine

The crystalline powder is loaded into the receiver for washing powder, and the dissolved lemon can immediately spill onto the drum before closing the door.

The longest washing mode with a water temperature of 90-95 ° C is selected and activated. It should have a minimum of 3 rinses.

Step # 3: removing crystalline acid residues

After the final set of water in the machine, open the compartment to load the powder and rub along the walls of the remaining lemon.If it's not there, then you can borrow some reagent in the kitchen.

In 30-60 minutes it is necessary to wipe the compartment with a damp cloth, removing the plaque present there. The main thing - to have time to remove the acid before the start of the rinse mode.

Step # 4: Inspecting the Washing Machine

After washing, open the door and allow the inner space to dry. Separately, wipe off the accumulated water in the pocket of the rubber cuff. Additionally, you can remove the bottom panel of the machine and clean the drain filter, in which breakaway particles of scale can get stuck.

Image Gallery
Photos of
Step 1. Checking the drum and unloading things
Step 1. Checking the drum and unloading things
Step # 2. Setting mode with a temperature of 95 ° C
Step # 2. Setting mode with a temperature of 95 ° C
Step # 3. Cleaning the powder compartment
Step # 3. Cleaning the powder compartment
Step # 4. Cleaning the debris filter
Step # 4. Cleaning the debris filter

The door of the CM and the rubber seal must be wiped with a cloth soaked in 1% citric acid solution. The remaining plaque should be easily removed. This completes the descaling process.

The frequency of care for equipment

Professionals recommend regular use of special means to prevent the occurrence of scale. This advice can be ignored if you clean the washing machine “lemon” every 4-6 months.

The frequency of the procedure depends on the hardness of the water in the region and the average temperature of the wash. The higher they are, the more often it is necessary to clean the equipment.

Inside the machine, citric acid is in contact only with the heating elements and the workspace of metal, plastic and rubber. She and her couples do not fall on the engine, electronic board and other critical elements of technology, so do not be afraid of the regular use of LC.

Although the process of cleaning CM citric acid is quite simple, it is still better to prevent the formation of scale than to deal with its removal.

Pulling underwear after washing
Long-term washing of the laundry in the drum can lead to mildew and a bad smell in the washing machine.

The proposed tips will help reduce the deposits of insoluble salts on the internal parts of the machine and reduce the likelihood of its breakdown:

  1. After washing, keep the drum open until dry.
  2. Buy powders containing water-softening ingredients.
  3. Pour detergent into the volume recommended for hard water.
  4. Do not wash in a machine dilapidated, decaying things.
  5. When washing it is preferable to use modes with a maximum temperature of 40-50 ° C.
  6. Pull the laundry out of the SM immediately after washing.

Removing a scum, it is not necessary to exceed the established concentration of citric acid. This will not enhance the effect, but will only lead to excess cash costs.

And we must not forget about the mandatory wiping of the sealing rubber cuff to dryness after the cleaning procedure.

Conclusions and useful video on the topic

After reviewing videos about the practice of using LC for cleaning a washing machine, one can be convinced of the effectiveness of this method.

Cleaning the washing machine from start to finish:

Analysis of the effectiveness of using citric acid for descaling proves that this tool copes with the task perfectly.

The main thing when cleaning the washing machine is not to get involved in amateur activities and to carefully follow the specified rules and recommendations for the procedure.

Related news

How to clean the washing machine with citric acid: the disadvantages and advantages of the method instruction image, picture, imagery

How to clean the washing machine with citric acid: the disadvantages and advantages of the method instruction 59

How to clean the washing machine with citric acid: the disadvantages and advantages of the method instruction 30

How to clean the washing machine with citric acid: the disadvantages and advantages of the method instruction 11

How to clean the washing machine with citric acid: the disadvantages and advantages of the method instruction 42

How to clean the washing machine with citric acid: the disadvantages and advantages of the method instruction 77

How to clean the washing machine with citric acid: the disadvantages and advantages of the method instruction 83