Criteria for selecting motor pumps for clean water
Modern motor pumps can be designed for clean and dirty water.Motor pumps for clean waterconsidered the most common and have lower cost and simple construction. Today we look at the features of these two types of units. For more information about motor pumps, see the link - https://electromotor.kiev.ua/products/motopompy-c8028/. Electromotor company website. Firm from Ukraine.
Characteristics of motor pumps for dirty water
The units intended for pumping of the polluted liquid differ in the following features:
- Availability of special cleaning filters. Thanks to such filters, solid particles are not getting into the pump mechanism that could damage the unit;
- Availability of parts that are resistant to wear. Often made using chromium, sturdy industrial steel, aluminum, cast under very high pressure, and so on;
- Reliable seals. As for the seals, to ensure a very high tightness, the pumping equipment is equipped with graphite-impregnated products;
- The driving wheel of the pump equipment has the big sizes. It is this wheel that is capable of creating a very large pressure, which facilitates the drawing of water, which will even pass through filters clogged with various debris;
- In such equipment, the impeller cleaning is carried out as quickly as possible. If cloth, algae or other objects get into the unit, they can be pulled out as quickly as possible.
Characteristics of clean water devices
As for the units intended for pure water, they have the following features:
- This equipment also has a special filter, but in this case it is a bit thinner. Due to this, large pollution cannot pass through it. If you plan to use such equipment for pumping contaminated liquid, then most likely it will not be able to serve you for a very long time. This is due to the fact that too thin a filter can break from the excessive pressure of dirt;
- Since such units have a not very reliable internal component, they are best suited precisely for pumping clean liquids, and not those that include various solid impurities.
We strongly advise you to pay attention to the Koshin KTH-80X motor pump for dirty water.To go to the online store of the company Electromotor click here. Due to such design features, this equipment is less expensive. If you still plan to pump contaminated liquids, we recommend that you give preference to equipment that is intended for just such a purpose.