Bulk floor: advantages and disadvantagesJanuary 25, 2018
The process of filling the floor begins with the preparation of the base. The composition of the working mixture includes polymeric materials. The self-leveling floor is absolutely flat, there are no joints, seams and cracks. The technology of installation allows to receive various drawings and to create modern interiors of rooms. Self-leveling floors often imitate various natural materials: concrete, ceramics, and parquet. The company https://goodfloor.in.ua/ installs a self-leveling epoxy floor in Kiev in the shortest possible time and with exemplary quality.
Seamless floors with a white tint suitable for minimalism. Quite often bulk floors use in trading floors, warehouse or office rooms.
1. The material is not subject to fire, well washes, creates a waterproofing layer.
2. Serve self-leveling floors for a long period. During operation, they can be updated.
3. The composition of which make the bulk floor, safe for humans.It does not emit harmful impurities.
4. Fungi and mold are not formed on the floor.
Builders face difficulties in dismantling self-leveling floors: the material is very durable, and its surface is not easy to remove.
If the floors are installed on the base, which is made of boards, then you need to build additional waterproofing. Most often bulk floor is established on the basis from concrete. When installing, pay close attention to the moisture content of the concrete surface. If it is high, the polymer material will peel off from the base. Before pouring, the concrete screed is carefully leveled, eliminates cracks and chips, and even is cleaned with a vacuum cleaner. Special impregnations are used to prevent air bubbles, voids and pores from appearing on the concrete surface.
In order to improve the quality of adhesion of the polymer material to the concrete, a primer mixture is applied. Quartz sand is added to it. Usually the primer is applied in two layers. Between the application make a break, leaving time to dry. The first layer of primer is applied with a metal spatula. This mixture penetrates the base of the concrete.The second layer (finish primer) is applied with a fur roller or a rubber mop.
The following materials are used for floor installation:
• needle roller;
• putty knife;
• various containers in order to mix components.
In the mixture to fill include liquid polymers, binding components (polyurethane or epoxy) and modifying substances to increase the level of plasticity of the material.
The polyurethane mixture is brought to a homogeneous mass, poured onto the surface and spread out in a thin layer. If air bubbles are formed on the surface, they are eliminated with a needle roller.